Last updated: 21 November 2026
To split a PDF and extract specific pages on a Mac, select the pages you want and save them as a new file. In Preview you can do this by dragging thumbnails out of the sidebar. For several ranges, many files, or very large PDFs, a dedicated split tool is faster and less error-prone.
"Split" and "extract" are often used interchangeably, but they are different jobs. Extracting means pulling a few chosen pages into one new PDF. Splitting means cutting the whole document into several files, by page range, by every page, or by chapter. This article covers both, and tells you which method fits which job.
If you're also handling sensitive documents, our guide to editing PDFs on a Mac without uploading them explains why it matters where the work happens.
What is the quickest way to extract pages from a PDF on a Mac?
The quickest way is Preview, which is already on your Mac. Open the PDF, show the thumbnail sidebar, select the pages you want, and drag them to the Desktop. Preview creates a new PDF containing only those pages.
Preview's approach is to choose View > Thumbnails (or Contact Sheet) and select the pages you want. Steps:
- Open the PDF in Preview (right-click, Open With, Preview).
- Choose View > Thumbnails, or View > Contact Sheet if the document is long and you want more pages visible at once.
- Click the first page you need. Hold Command and click to add non-adjacent pages, or hold Shift and click to select a continuous range.
- Drag the selected thumbnails to the Desktop or a Finder folder.
- Rename the new file straight away. Preview names it after the first page's content or the original file, and it's easy to lose.
This works well for one-off jobs of up to a dozen pages. It gets tedious when you need page 3 to 9, 41 to 47, and 112, in one document, or when you need to repeat it for ten files.
Does Preview change the original file?
It can. Apple's guidance, as quoted by DEV Community, is that Preview saves changes automatically, so use File > Duplicate first if you plan to delete or move pages inside the original. Dragging pages out leaves the original untouched, but the "delete the pages I don't want" method edits the original in place. If you take that route, duplicate the file first.
Can I extract pages using Print to PDF instead?
Yes. Any Mac app that can print can also save a page range as a PDF. The Setapp guide describes this route as opening the PDF in Preview, choosing File > Print, clicking the PDF button, and saving. Before saving, set the page range in the print dialog (for example, From 12 to 20).
This is handy when you know the page numbers and don't want to scroll thumbnails. It has three drawbacks:
- Page numbers can mislead. The print dialog counts physical pages from 1. A report whose printed page "1" sits on physical page 7 will confuse you. Check against the thumbnail sidebar, not the number printed on the page.
- It re-renders the document. Printing to PDF can strip some features, such as bookmarks, form fields and, in some cases, selectable-text quality or links. Check the result.
- File size can change. Sometimes the extracted file is larger than you'd expect, because shared fonts and images are duplicated or reprocessed. If that happens, see our guide to compressing a PDF on a Mac without losing readability.
For a contract, a form, or anything you'll send to someone else, it's worth opening the result and scrolling through it before sharing.
Which method should I use? A comparison
The right method depends on how many pages, how many ranges, and how often you'll repeat the job.
| Method | Best for | Handles multiple ranges at once? | Watch out for |
|---|---|---|---|
| Preview: drag thumbnails | A handful of pages, one time | Yes, with Command-click, but into one file only | Easy to select wrongly in long documents |
| Preview: delete pages, then save | Keeping most of a document | One file only | Edits the original unless you duplicate first |
| Print dialog: page range to PDF | Known, continuous page ranges | No, one range per run | Can drop bookmarks, links, or form fields; page numbers may be offset |
| Command-line tool such as qpdf | Scripting and automation | Yes | Requires Terminal comfort |
| Dedicated app with split and extract tools | Repeated work, many ranges, big files | Yes | Needs installing |
On the command-line option: DEV Community notes that, on any system, qpdf --split-pages file.pdf out.pdf writes every page to its own file. That's a good option if you're comfortable in Terminal and need to automate. For most people, a visual tool is safer, because you can see the pages you're choosing.
How do I split a long PDF into several smaller files?
Decide your split rule first, then apply it. Common rules are one file per chapter, one file per fixed number of pages, one file per page, and one file per range you define. Preview can't do this in one step, so you either repeat the drag method per section or use a tool with a dedicated split function.
Splitting by chapter or section
Open the PDF and note the first and last physical page of each section from the thumbnails or the bookmarks panel. Write them down as a list like "Intro 1–6, Part A 7–48, Part B 49–90." Then extract each range into its own file. Naming each file as you save it, for example report-part-a-pp7-48.pdf, saves confusion later.
Splitting every page into its own file
This is common for scanned stacks: 60 receipts scanned in one PDF, each needing its own file. Dragging 60 thumbnails individually is the slow way. A split tool, or the qpdf command above, does it in one go. After splitting, the files are usually numbered in order, so rename them according to what they contain.
Splitting by file size
Sometimes the aim isn't structure but a size limit, such as an email attachment cap. Split into fixed page counts, then check each part's size in Finder. Pages with large images weigh far more than text pages, so equal page counts don't give equal file sizes. Compressing the file first may avoid needing to split at all.
What should I check before sharing the extracted pages?
Check four things: that the right pages came out, that the order is correct, that no sensitive content remains, and that the file opens cleanly. Extracting pages only removes the other pages from the new file. It doesn't clean up what's on the pages you kept.
- Right pages, right order. Scroll through the whole new file. Command-click selection keeps pages in their original order, not the order you clicked, so reorder in the sidebar if needed.
- Sensitive details on kept pages. If a kept page still contains a name, account number, or signature you don't want to share, extraction doesn't hide it. Covering text with a black box isn't enough either, as hidden text can remain underneath. Our article on how to redact a PDF properly covers how to remove it for real.
- Bookmarks and links. If the original had a table of contents, links in the extracted pages may point to pages that no longer exist. Test a few.
- Metadata and file name. The new file may carry the original title or author in its properties, and the file name may reveal more than you intend.
If the extracted pages should be restricted to certain readers, see how to password protect a PDF on a Mac, including what a password does and doesn't stop.
What if I need to put pages back together afterwards?
You can merge the pieces back into a single file. A common workflow is to extract pages from several long PDFs and combine them into one pack, such as the relevant pages from three reports for a meeting. Our walkthrough on how to merge PDF files on a Mac explains how to get the order right.
A tidy order of work is: extract first, then merge, then compress if the result is too big. Doing it in that order avoids carrying unneeded pages and their images through the later steps.
Convert2Any is a Mac app that, according to its site, includes PDF tools for merging, splitting, reordering and extracting pages, and processes files on your computer rather than uploading them. If you do this often, it's a way to handle ranges and batches in one place.
Frequently asked questions
Is it safe to use an online tool to split a PDF?
It depends on the document. Online splitters require uploading your file to someone else's server, which you may not want for contracts, medical records, or ID scans. Doing it on your Mac with Preview or a local app means the file never leaves your computer.
Why does my extracted PDF have a different page count than I expected?
Usually because the printed page numbers differ from physical page numbers. Front matter such as a cover and contents page shifts everything. Use the thumbnail sidebar's position numbers rather than the numbers printed on the pages.
Does extracting pages reduce the file size?
Usually, yes, since fewer pages mean less data. But it isn't guaranteed to shrink in proportion, particularly with Print to PDF, which can re-process images and fonts. If the file is still too large, compress it afterwards.
Can I extract pages from a password-protected PDF?
You'll typically need to unlock the file with its password first. Only extract pages from documents you're entitled to use, and keep in mind that the new file won't automatically inherit the original's password.
How do I extract pages from a scanned PDF so the text is searchable?
Extracting pages from a scan gives you a scan. The text isn't searchable unless it has been through text recognition (OCR), which you can run before or after extraction. Doing it after, on only the pages you kept, is quicker.